A comprehensive analysis of the characteristics and main applications of gypsum-based self-leveling compounds! Recommended for collection!
Release time:2022-02-09 17:00
Gypsum-based self-leveling compound is a kind of ground leveling and drying mortar, which is precisely prepared and uniformly mixed with gypsum materials, special aggregates and various building chemical additives in the factory.
Gypsum-based self-leveling compound is a type of floor leveling and drying mortar, precisely prepared and uniformly mixed in a factory using gypsum materials, special aggregates, and various building chemical additives.
Development of Gypsum-Based Self-Leveling Compound
As early as the 1960s, in order to address the corrosion of copper pipes by cement concrete in floor heating systems, European countries initially chose gypsum-based floor materials and polyethylene pipes. After more than 20 years of improvement and development, by the 1980s, the heating technology in Europe and the United States had become quite mature, and in the late 1980s, gypsum companies initially formulated standards for gypsum-based self-leveling compounds currently used in floor heating.
Development of Gypsum-Based Self-Leveling Compound Abroad
Due to Japan's severe labor shortage and high costs, the development of self-leveling floor materials started earlier. In 1972, basic research was primarily conducted on gypsum-based and cement-based self-leveling materials, followed by the emergence of commercial gypsum-based self-leveling materials.
Since the 1980s, developed countries such as the United States, France, Germany, Italy, Sweden, and Finland have conducted preliminary explorations of self-leveling mortar. For example, Germany has produced gypsum-based self-leveling materials with a strength of 20-30 MPa and a laying thickness of 10 mm using hemihydrate gypsum. The United States has chosen a mixture of C-gypsum, and gypsum-based self-leveling floor materials pumped on-site after adding aggregates have also been widely used.
In Germany alone, nearly 100 million square meters of floor mortar were produced in 2001. Before that, dry-mixed gypsum-based self-leveling mortar accounted for 16.4%, and on-site mixed gypsum-based self-leveling mortar accounted for 6.6%. From the application of desulfurized gypsum in Europe in 2001, 15% of desulfurized gypsum was used in gypsum-based self-leveling mortar. In the European market, it is easy to see that gypsum-based self-leveling mortar occupies a large proportion.
Development of Gypsum-Based Self-Leveling Compound in China
China's gypsum-based self-leveling compound started relatively late, roughly in the late 1980s and early 1990s. In 1986, gypsum-based self-leveling materials using fluorogypsum waste as a binder were successfully developed, but due to the poor water resistance of gypsum and the low risk of corrosion of iron components caused by neutral or acidic environments, production remained low. In recent years, some units have also produced gypsum-based self-leveling mortar products, but most manufacturers use building gypsum, increasing the amount of chemical additives to meet the required functional requirements. The cost of additives makes the production cost of self-leveling gypsum still somewhat distant from that of foreign countries in terms of pharmaceutical technology and construction equipment.
The main binder of gypsum-based self-leveling compound is gypsum, which has an automatic leveling function, therefore it has the following advantages:
(1) Accurate structural base layer, high level, no hollowing, no cracks; easy and convenient operation; in addition, water pump construction can be chosen, laying 800 to 1000 square meters per day, which is 5 to 10 times faster than existing floor materials.
(2) When used as a leveling cover layer for "floor heating", it will not crack or bulge due to thermal expansion and contraction like cement mortar layers.
Recommended Blog